Articles avec comité de lecture (40)
2022
Durand M., Cormier J., Paumier F., Katnagallu S., Saksena A., Kontis P., Pettinari-Sturmel F., Hantcherli M., Franchet J.M., Dumont C., Bozzolo N., "Chemical redistribution and change in crystal lattice parameters during stress relaxation annealing of the AD730TM superalloy", Acta Materialia, 237 (2022) p.118141 [DOI:https://doi.org/10.1016/j.actamat.2022.118141]
2021
Katnagallu S., Vernier S., Charpagne M.-A., Gault B., Bozzolo N., Kontis P., "Nucleation mechanism of hetero-epitaxial recrystallization in wrought nickel-based superalloys", Scripta Materialia, 191 (2021) p.7-11 [DOI:https://doi.org/10.1016/j.scriptamat.2020.09.012]
Nicolay A., Franchet J.M., Cormier J., Logé R.E., Fiorucci G., Fausty J., Van Der Meer M., Bozzolo N., "Influence of Joule effect heating on recrystallization phenomena in Inconel 718", Metallurgical and Materials Transactions A, 52 (2021) p.4572-4596 [DOI:https://doi.org/10.1007/s11661-021-06411-5]
Fausty J., Murgas Portilla B., Florez S., Bozzolo N., Bernacki M., "A new analytical test case for anisotropic grain growth problems", Applied Mathematical Modelling, 93 (2021) p.28-52 [DOI:https://doi.org/10.1016/j.apm.2020.11.035]
2020
Bozzolo N., Bernacki M., "Viewpoint on the formation and evolution of annealing twins during thermomechanical processing of FCC metals and alloys", Metallurgical and Materials Transactions A, 51 (2020) p.2665-2684 [DOI: https://doi.org/10.1007/s11661-020-05772-7]
Seret A., Moussa C., Bernacki M., Bozzolo N., "A mean field model of agglomeration as an extension to existing precipitation models", Acta Materialia, 192 (2020) p.40-51 [DOI:https://doi.org/10.1016/j.actamat.2020.04.029]
Mrozowski N., Hénaff G., Hamon F., Rouffié A.L., Franchet J.M., Cormier J., Villechaise P., "Aging of gamma′ Precipitates at 750 deg C in the Nickel-Based Superalloy AD730TM: a Thermally or Thermo- Mechanically Controlled Process?", Metals (open access journal), 10 (2020) p.426 [DOI:doi:10.3390/met10040426]
Charpagne M.-A., Polonsky A., Echlin M.P., Jacomet S., De Jaeger J., De Graef M., Bozzolo N., Pollock T., "Growth accidents induced by primary gamma prime precipitates in a polycrystalline nickel-based superalloy", Scripta Materialia, 186:109-113 (2020) [DOI:https://doi.org/10.1016/j.scriptamat.2020.05.020]
Fausty J., Bozzolo N., Bernacki M., "A 2D Level-Set Finite Element grain coarsening study with heterogeneous grain boundary energies", Applied Mathematical Modelling, 78 (2020) p.505-518 [DOI:https://doi.org/10.1016/j.apm.2019.10.008]
2019
Masoumi F., Shahriari D., Monajati H., Cormier J., Flipo B.C.D., Devaux A., Jahazi M., "Linear Friction Welding of AD730TM Ni-base Superalloy: Process-Microstructure-Property Interactions", Materials and Design, 183 (2019) p.108117 [DOI:https://doi.org/10.1016/j.matdes.2019.108117]
Pettinari-Sturmel F., Vultos W., Hantcherli M., Warot-Fonrose B., Marcelot C., Douin J., Cormier J., Villechaise P., Devaux A., "Creep behavior in the new AD730TM nickel-based disk superalloy – Influence of aging heat treatment and local chemical fluctuations", Materials Science and Engineering A, 754 (2019) p.9-17 [DOI:https://doi.org/10.1016/j.msea.2019.02.088]
Tabaie S., Shahriari D., Plouze C., Devaux A., Cormier J., Jahazi M., "Hot Ductility Behavior of AD730 Nickel-base Superalloy", Materials Science and Engineering A, 766 (2019) p.138391 [DOI:https://doi.org/10.1016/j.msea.2019.138391]
Texier D., Stinville J.C., Echlin M.P., Pierret S., Villechaise P., Pollock T., Cormier J., "Short crack propagation from cracked non-metallic inclusions in a Ni-based polycrystalline superalloy", Acta Materialia, 165 (2019) p.241-258 [DOI:https://doi.org/10.1016/j.actamat.2018.11.051]
Nicolay A., Fiorucci G., Franchet J.M., Cormier J., Bozzolo N., "Influence of strain rate on subsolvus dynamic and post-dynamic recrystallization kinetics of Inconel 718", Acta Materialia, 174 (2019) p.406-417 [DOI:https://doi.org/10.1016/j.actamat.2019.05.061]
Seret A., Moussa C., Bernacki M., Signorelli J., Bozzolo N., "Estimation of geometrically necessary dislocation density from filtered EBSD data by a local linear adaptation of smoothing splines (LLASS)", Journal of Applied Crystallography, 52 (2019) p.548-563 [DOI:https://doi.org/10.1107/S1600576719004035]
Nicolay A., Franchet J.M., Cormier J., Mansour H., De Graef M., Seret A., Bozzolo N., "Discrimination of dynamically and post-dynamically recrystallized grains based on EBSD data: application to Inconel 718", Journal of Microscopy, 273:Issue 2 (2019) p.135-147 [DOI: https://doi.org/10.1111/jmi.12769]
2018
Agnoli A., Le Gall C., Thébault J., Marin E., Cormier J., "Mechanical Properties Evolution of γ′/γ″ Nickel-Base Superalloys During Long-Term Thermal Over-Aging", Metallurgical and Materials Transactions A, 49 (2018) p.4290–4300 [DOI:https://doi.org/10.1007/s11661-018-4778-x]
Bourdin F., Stinville J.C., Echlin M.P., Callahan P., Lenthe W.C., Torbet C.J., Texier D., Bridier F., Cormier J., Villechaise P., Pollock T., Valle V., "Measurements of plastic localization by heaviside-digital image correlation", Acta Materialia, 157 (2018) p.307-325 [DOI:https://doi.org/10.1016/j.actamat.2018.07.013]
Fausty J., Bozzolo N., Pino Muñoz D., Bernacki M., "A novel level-set finite element formulation for grain growth with heterogeneous grain boundary energies", Materials and Design, 160 (2018) p.578-590 [DOI:https://doi.org/10.1016/j.matdes.2018.09.050]
Masoumi F., Thébaud L., Shahriari D., Jahazi M., Cormier J., Devaux A., Flipo B.C.D., "High temperature creep properties of a linear friction welded newly developed wrought Ni-based superalloy", Materials Science and Engineering A, 710 (2018) p.214-226
Vernier S., Franchet J.M., Dumont C., Bozzolo N., "A mechanism leading to γ' precipitates with {111} facets and unusual orientation relationships to the matrix in γ/γ' nickel-based superalloys ", Metallurgical and Materials Transactions A, 49A (2018) p.4308-4323 [DOI:https://doi.org/10.1007/s11661-018-4734-9]
Hamadi S., Hamon F., Delautre J., Cormier J., Villechaise P., Utada S., Kontis P., Bozzolo N., "Consequences of a room temperature plastic deformation during processing on the durability of a Ni-based SX superalloy", Metallurgical and Materials Transactions A, 49A (2018) p.4246-4261 [DOI:https://doi.org/10.1007/s11661-018-4748-3]
Seret A., Moussa C., Bernacki M., Bozzolo N., "On the coupling between recrystallization and precipitation following hot deformation in a γ- γ’ Nickel-Based superalloy", Metallurgical and Materials Transactions A, 49A (2018) p.4199-4213 [DOI:https://doi.org/10.1007/s11661-018-4707-z]
Vernier S., Franchet J.M., Dumont C., Vennéguès P., Bozzolo N., "γ′ precipitates with a twin orientation relationship to their hosting grain in a γ-γ′ nickel-based superalloy", Scripta Materialia, 153 (2018) p.10-13 [DOI:https://doi.org/10.1016/j.scriptamat.2018.04.037]
Ilin D., Bozzolo N., Toulorge T., Bernacki M., "Full field modeling of recrystallization: effect of intragranular strain gradients on grain boundary shape and kinetics", Computational Materials Science, 150 (2018) p.149-161 [DOI:https://doi.org/10.1016/j.commatsci.2018.03.063]
Thébaud L., Villechaise P., Crozet C., Devaux A., Béchet D., Franchet J.M., Rouffié A.L., Mills M., Cormier J., "Is there an optimal grain size for creep resistance in Ni-based disk superalloys?", Materials Science and Engineering A, 716 (2018) p.274-283 [DOI:https://doi.org/10.1016/j.msea.2017.12.104]
Vernier S., Franchet J.M., Lesne M., Douillard T., Silvent J., Langlois C., Bozzolo N., "iCHORD-SI combination as an alternative to EDS-EBSD coupling for the characterization of γ-γ’ Nickel-base superalloy microstructures", Materials Characterization, 142 (2018) p.492-503 [DOI:https://doi.org/10.1016/j.matchar.2018.06.015]
Charpagne M.-A., Franchet J.M., Bozzolo N., "Overgrown grains appearing during sub-solvus heat treatment in a polycrystalline γ-γ’ Nickel-based superalloy", Materials and Design, 144 (2018) p.353-360 [DOI:https://doi.org/10.1016/j.matdes.2018.02.048]
2016
Masoumi F., Shahriari D., Jahazi M., Cormier J., Devaux A., "Kinetics and Mechanisms of γ′ Reprecipitation in a Ni-based Superalloy", Scientific Reports, 6 (2016) p.28650 [DOI:https://doi.org/10.1038/srep28650]
Cormier J., Matavelli Suave L., "Comments on 'Microstructural evolution of hydroformed Inconel 625 bellows", Journal of Alloys and Compounds, 680 (2016) p.6-7 [DOI:https://doi.org/10.1016/j.jallcom.2016.04.078]
Gourdin S., Cormier J., Hénaff G., Nadot Y., Hamon F., Pierret S., "Assessment of specific contribution of residual stress generated near surface anomalies in the high temperature fatigue life of a René 65 superalloy", Fatigue and Fracture of Engineering Materials and Structures, 40:1 (2016) p.69-80 [DOI: https://doi.org/10.1111/ffe.12475]
Jouiad M., Marin E., Devarapalli R.S., Cormier J., Ravaux F., Le Gall C., Franchet J.M., "Microstructure and mechanical properties evolutions of Alloy 718 during isothermal and thermal cycling over-aging", Materials and Design, 102 (2016) p.284-296 [DOI:https://doi.org/10.1016/j.matdes.2016.04.048]
Masoumi F., Jahazi M., Shahriari D., Cormier J., "Coarsening and dissolution of γ′ precipitates during solution treatment of AD730 TM Ni-based superalloy: mechanisms and kinetics models", Journal of Alloys and Compounds, 658 (2016) p.981-995 [DOI:https://doi.org/10.1016/j.jallcom.2015.11.002]
Matavelli Suave L., Cormier J., Bertheau D., Villechaise P., Soula A., Hervier Z., Hamon F., "High temperature low cycle fatigue properties of Alloy 625", Materials Science and Engineering A, 650 (2016) p.161-170 [DOI:https://doi.org/10.1016/j.msea.2015.10.023]
Texier D., Casanova-Gomez A., Pierret S., Franchet J.M., Pollock T., Villechaise P., Cormier J., "Microstructural features controlling the variability in low cycle fatigue properties of alloy Inconel 718DA at intermediate temperature", Metallurgical and Materials Transactions A, 47 (2016) p.1096-1109 [DOI:https://doi.org/10.1007/s11661-015-3291-8]
Charpagne M.-A., Vennéguès P., Billot T., Franchet J.M., Bozzolo N., "Evidence of multimicrometric coherent γ’ precipitates in a hot-forged γ-γ’ nickel-based superalloy", Journal of Microscopy, 263:1 (2016) p.106-112 [DOI:https://doi.org/10.1111/jmi.12380]
Charpagne M.-A., Billot T., Franchet J.M., Bozzolo N., "Heteroepitaxial recrystallization : A new mechanism discovered in a polycrystalline γ-γ′ nickel based superalloy", Journal of Alloys and Compounds, 688 (2016) p.685-694 [DOI:https://doi.org/10.1016/j.jallcom.2016.07.240]
2015
Dorémus L., Cormier J., Villechaise P., Hénaff G., Nadot Y., Pierret S., "Influence of residual stresses on the fatigue crack growth from surface anomalies in a nickel-based superalloy", Materials Science and Engineering A, 644 (2015) p.234-246 [DOI:https://doi.org/10.1016/j.msea.2015.07.077]
Larrouy B., Villechaise P., Cormier J., Berteaux O., "Grain boundary - Slip bands interactions: impact on the fatigue crack initiation in a polycrystalline forged Ni-based superalloy", Acta Materialia, 99 (2015) p.325-336 [DOI:https://doi.org/10.1016/j.actamat.2015.08.009]
Thébaud L., Villechaise P., Cormier J., Crozet C., Devaux A., Béchet D., Franchet J.M., Organista A., Hamon F., "Relationships between Microstructural Parameters and Time-Dependent Mechanical Properties of a New Nickel-Based Superalloy AD730™", Metals (open access journal), 5:4 (2015) p.2236-2251 [DOI:https://doi.org/10.3390/met5042236]
Actes de conférence (14)
2020
Govaère A., Rouffié A.L., Franchet J.M., Galy D., Dumont C., Devaux A., Crozet C., Kontis P., Villechaise P., Cormier J., "Is the carbon content really an issue for the LCF durability of forged gamma/gamma prime Ni-Based Disk Alloys?", Superalloys 2020 : Proceedings of the 14th International Symposium on Superalloys (2020) p.591-602 [DOI:https://doi.org/10.1007/978-3-030-51834-9_57]
Panella M., Signor L., Cormier J., Bernacki M., Villechaise P., "Experimental and simulation study of the effect of precipitation distribution and grain size on the AD730TM Ni-based polycrystalline superalloy tensile behavior", Superalloys 2020 : Proceedings of the 14th International Symposium on Superalloys (2020) p.570-578 [DOI:https://doi.org/10.1007/978-3-030-51834-9_55]
Texier D., Stinville J.C., Charpagne M.-A., Chen Z., Valle V., Villechaise P., Pollock T., Cormier J., "Role of non-metallic inclusions and twins on the variability in fatigue life in Inconel 718 nickel base superalloy", Superalloys 2020 : Proceedings of the 14th International Symposium on Superalloys (2020) p.629-639 [DOI:https://doi.org/10.1007/978-3-030-51834-9_61]
Pettinari-Sturmel F., Hantcherli M., Vultos W., Marcelot C., Warot-Fonrose B., Tisseyre M., Douin J., Villechaise P., Cormier J., "Contribution of Primary gamma prime Precipitates in the Deformation Creep Mechanisms in the Ni-Based Polycrystalline AD730 TM Superalloy", Superalloys 2020 : Proceedings of the 14th International Symposium on Superalloys (2020) p.613-618 [DOI:https://doi.org/10.1007/978-3-030-51834-9_24]
Charpagne M.-A., Stinville J.C., Callahan P., Cormier J., Villechaise P., Valle V., Texier D., Bozzolo N., Pollock T., "Tuning strain localization in polycrystalline nickel base superalloy by high temperature processing", Superalloys 2020 : Proceedings of the 14th International Symposium on Superalloys (2020) p.471-481 [DOI:https://doi.org/10.1007/978-3-030-51834-9_46]
Durand M., Cormier J., Villechaise P., Franchet J.M., Dumont C., Bozzolo N., "Metallurgical mechanisms upon stress relaxation annealing of the AD730TM superalloy", Superalloys 2020 : Proceedings of the 14th International Symposium on Superalloys (2020) p.546-558 [DOI:https://doi.org/10.1007/978-3-030-51834-9_53]
Nicolay A., Franchet J.M., Bozzolo N., Cormier J., "Metallurgical analysis of tensile and creep behavior variability in Inconel 718 forgings", Superalloys 2020 : Proceedings of the 14th International Symposium on Superalloys (2020) p.559-569 [DOI:https://doi.org/10.1007/978-3-030-51834-9_54]
2016
Devarapalli R.S., Marin E., Cormier J., Le Gall C., Franchet J.M., Jouiad M., "Microstructure evolution during thermal aging of Inconel 718", Characterization of Minerals, Metals, and Materials (2016) p.11-18 [DOI:https://doi.org/10.1007/978-3-319-48210-1_2]
Taboada M., Sasaki Reda L., Effen Santos G., Cormier J., Dumont C., Villechaise P., Bocher P., Texier D., Georges E., Bridier F., Hamon F., Devaux A., "Mechanical properties of cast and wrought hybrid disks", Superalloys 2016 : 13th International Symposium on Superalloys (2016) p.539-548 [DOI:DOI:10.1002/9781119075646]
Thébaud L., Villechaise P., Cormier J., Hamon F., Crozet C., Devaux A., Franchet J.M., Rouffié A.L., Organista A., "Relationships between microstructural paramaters and time-dependent mechanical properties of a new nickel based superalloy AD730TM", Superalloys 2016 : 13th International Symposium on Superalloys (2016) p.877-886 [DOI:DOI:10.1002/9781119075646]
Wessman A., Laurence A., Cormier J., Villechaise P., Billot T., Franchet J.M., "Thermal stability of cast and wrought alloy René 65", Superalloys 2016 : 13th International Symposium on Superalloys (2016) p.793-800 [DOI:DOI:10.1002/9781119075646]
Charpagne M.-A., Billot T., Franchet J.M., Bozzolo N., "Heteroepitaxial recrystallization, a new recrystallization mechanism in sub-solvus forged γ-γ' Nickel-based superalloys with low lattice mismatch", Recrystallization and Grain Growth VI 2016, Proceedings (2016) p.259-264 [DOI:DOI:10.1002/9781119328827]
Scholtes B., Ilin D., Settefrati A., Bozzolo N., Agnoli A., Bernacki M., "Full field modeling in a level set framework of Zener pinning phenomenon - discussion of classical limit mean grain size equation", Superalloys 2016 : 13th International Symposium on Superalloys (2016) p.497-503 [DOI:DOI:10.1002/9781119075646]
Charpagne M.-A., Billot T., Franchet J.M., Bozzolo N., "Heteroepitaxial recrystallization observed in RENE65 and UDIMET 720: A new recrystallization mechanism possibly occurring in all low lattice mismatch γ-γ’ Nickel based superalloys? ", Superalloys 2016 : 13th International Symposium on Superalloys (2016) p.417-426 [DOI:DOI:10.1002/9781119075646]
